Original quality ID IC RFID 08CD copying machine support Class A and Class B cards - MIFARE cards (Classics, DESFire)
Weight: 0.3kg
Model No.ACM-01
If No Price , Please Login
Description
08CD ID/IC RFID Duplicator — User Manual
1. Product Overview
The 08CD is a handheld RFID card and keyfob duplicator. It can read, write, clone and decode common low-frequency (LF) and high-frequency (HF) smart cards used in access control systems.
After “√” appears, write the decoded data to a UID card.
Note: This device is intended for legitimate access-control duplication and personal card backup only. Unauthorized copying of third-party credentials is prohibited.
6. Supported Tags Summary
Readable:
EM4100, EM4200, TK4100
MIFARE Classic 1K/4K
NTAG203, Ultralight
HID Prox 1386 / 1326 / 1346
Writable:
T5577, EM4305
UID changeable 13.56 MHz cards
7. Precautions
Use good-quality AAA batteries if not powered by USB.
Keep cards steady during reading/writing.
Do not remove the card while writing.
Avoid metal surfaces during operation.
Operating temperature: 0°C – 60°C.
8. Troubleshooting
Problem
Solution
No response when scanning
Check power / frequency mode
Read failed
Move card closer, avoid metal
Write failed
Use correct writable chip (T5577/UID)
Encrypted card not copied
Use PC decode function
Screen frozen
Restart the device
08CD ID/IC RFID Duplicator — Locksmith FAQ
Designed for professional locksmiths, access-control installers, and security technicians.
Q1: What chips can the 08CD actually write to?
A: Two main families:
Frequency
Writable Chip Types
125 kHz (LF)
T5577, EM4305 — these are the industry standards for cloning EM4100/EM4200/HID Prox credentials
⚠️ Pro tip: Always carry T5577 keyfobs AND UID cards in your service van. Roughly 70% of residential/commercial access cards are one of these two types.
Q2: A customer brought me an "encrypted" MIFARE card. Can 08CD handle it?
A: Yes, but with a workflow:
Read the card on 08CD standalone — it will show the UID and detect encryption.
Connect to PC via USB.
Use the bundled decoding software (included on the SD card or downloadable from the manufacturer).
Place the encrypted card on the reader → click Decode.
Once you see "√" (success), write the decoded data to a UID card.
⚠️ Important: Standalone mode cannot bypass crypto; PC-assisted decoding is required for encrypted sector data. The 08CD reads the UID in standalone mode even on encrypted cards, so you can at least identify the card type on-site.
Q3: How do I know if a card is 125 kHz or 13.56 MHz before I start?
A: Three quick methods:
Method
How
Visual check
13.56 MHz cards usually have a square antenna coil visible under light; 125 kHz cards have a large round/oval coil
08CD auto-detect
Power on → press SCAN → the device beeps and shows frequency + chip type on screen
Physical test
Try 125 kHz mode first (most common in legacy systems); if no read, switch to 13.56 MHz
💡 Field stat: In North America, ~60% of access control is still 125 kHz (HID Prox, EM). In Europe and Asia, 13.56 MHz (MIFARE) dominates newer installs.
Q4: Customer says "my building uses HID." Can I clone it?
A: Depends on the HID format:
HID Format
Cloneable?
Notes
HID Prox 125 kHz (1386, 1326, 1346)
✅ Yes
Clone to T5577 or EM4305
HID iCLASS 13.56 MHz
❌ No (encrypted sectors)
08CD reads UID only; full clone requires specialized tools
HID SEOS
❌ No
Encrypted, not supported
⚠️ Legal note: Many jurisdictions require written authorization from the property manager before duplicating HID credentials. Always document consent.
Q5: Write failed — what went wrong?
A: Most common causes, in order:
Wrong writable chip — Trying to write a 125 kHz card to a UID (13.56 MHz) tag, or vice versa. Match frequency first.
Chip is read-only — Some cards look rewritable but are locked. Test with a known-good T5577/UID.
Card moved during write — Hold steady for 3–5 seconds. Don't lift until "Write Success" appears.
Low battery — If screen dims or beeps weaken, replace AAA batteries or use USB power.
Wrong mode selected — Double-check you're in the correct frequency mode (press MODE to cycle).
Q6: Can I manually program a card number if I don't have the original?
A: Yes. This is a key locksmith feature:
Main menu → INPUT
Enter the Facility Code + Card Number (format depends on system; common: 26-bit Wiegand)
Place a blank T5577/EM4305 on the reader
Press WRITE
💡 Use case: Customer lost their card, you have the number from the access control panel → you can issue a replacement on the spot.
Q7: Battery life — how long between changes?
A: With 4 × AAA alkaline batteries:
~800–1,200 reads (typical service calls)
~200–300 full write cycles
Standby: several weeks
For heavy daily use, run on USB 5V (power bank or vehicle USB adapter). The device works while charging.
Q8: What's the read range? Can I read through a wallet or phone case?
A:
Typical: 2–5 cm (0.8–2 inches)
Through material: May read through thin leather or fabric at ~1–2 cm, but metal objects, RFID-blocking wallets, and thick plastic will block the signal entirely
Pro tip: Ask the customer to remove the card from any holder before scanning. Saves time.
Q9: Firmware updates — how do I keep the device current?
A:
Check the manufacturer's website or your distributor for .bin firmware files.
Copy the file to the root directory of the device's SD card (if equipped) or internal storage.
Power on while holding MODE → enters update mode.
Follow on-screen prompts.
💡 Some distributors push updates quarterly. Ask yours to add you to their notification list.
Q10: Legal and ethical — what should I document?
A: Professional best practice:
✅ Always get written authorization (text/email is fine) from the property owner or authorized manager before duplicating any access credential.
✅ Keep a logbook of duplicates: date, customer name, card type, last 4 digits of card number.
✅ Refuse suspicious requests (e.g., someone who can't prove they live/work at the property).
✅ Know your local laws — some jurisdictions classify unauthorized card copying as a criminal offense.
This protects you and your business. Many locksmith associations provide a standard "Card Duplication Authorization Form" — use it.
Q11: What accessories should I carry in my service kit?
Item
Why
T5577 keyfobs (10–20 pcs)
Most common 125 kHz writable
EM4305 cards (5–10 pcs)
Alternative LF writable
UID cards, Gen1 & Gen2 (10 pcs each)
13.56 MHz cloning
UID keyfobs (5–10 pcs)
Compact alternative for customers
USB cable + power bank
Backup power for long jobs
AAA batteries (spare set)
Always
Q12: The screen is in Chinese / wrong language — how do I change it?
A:
Power on → main menu
Look for the gear/settings icon (usually bottom-right)
Select Language → choose English
Save & exit
If the menu is stuck in Chinese and you can't navigate:
The word for "Settings" is 设置 (shè zhì)
"Language" is 语言 (yǔ yán)
"English" is 英语 (yīng yǔ)
Or: Hold ESC + Power On for 5 seconds on some firmware versions to force English default.
The step to creat an account to see our products price and shopping: